High power Smarter lithium battery Intelligent charger,48V battery charger

Short Description:

Built-in PFC Intelligent Charger,Universal wide AC range input, high PF value >0.95 with intelligent protections charger, High power and High efficiency lithium battery charger.

Send email to us

Product Detail

TECHNICAL DATA

Product Tags

Product Description

• Charger for lead-acid batteries (Flooded, Gel, and AGM) and Li-Ion batteries (lithium iron, lithium manganese and lithium nickel cobalt manganese) (Note. 1)
• multi-stages smart charging characteristic
• Universal AC voltage range 90~264VAC
• Built-in active PFC function, PF>0.95
• Protections: Short circuit /Overload /Over voltage /Low voltage /Over temperature /Over current /Reverse polarity /Timing /Fully charged shut down /No leaking current drain out of the battery
• High efficiency, Maximum efficiency can be up to 92%
• Class I power (with earth pin)
• Fan cooling
• 2 color LED loading indicator and LED Segment Displays
• Embed MCU intelligent control
• No spark DC plug design when the DC connector plugs into or unplugs from the battery
• No spark design when short circuit protection
• Active zero voltage battery charge input port

Smart lithium battery charger input & output terminal

Input Plug customize available

Output terminal

Smart charger Series parameters

Output	DC voltage	14.6~16.8V	29.2~29.4V	42V	54.6~58.8V	67.2~71.4V	84V
	Rated Current (220VAC)	40A	40A	30A	30A	25A	20A
	Rated Current (110VAC)	40A	30A	30A	25A	20A	16A
	Rated Power	672W	1174W	1260W	1764W	1785W	1680W
	LED Indicator	CC and CV Charging current>Rated current10%: RED; CV charging current <=Rated current10%:GREEN

Input	Voltage Range	90~264VAC
	Frequency Range	47~63HZ
	Power Factor	>0.95/230VAC , >0.98/115VAC
	Efficiency	92%
	AC Current	15A
	Inrush Current	Cold Start<60A
	Leakage Current	<3.5ma/240VAC
Protection	Short Circuit	RED LED Fast Flashing and shut down output voltage; Recovers automatically after fault condition is removed.
	Reverse Polarity
	Low Voltage
	Over Current	Shun down output voltage, re-power on to recover.
	Over Voltage
	Over Load
	Over Temperature	85°C±10°C(RTH2),Automatically derate charge current to half maximum rated current.
Interface	RS485, CAN2.0B
	OLED Display
	UART	Baud rate:9600bps, 8 data bits, no parity, 1 Stop Bit
Environment	Working Temp.	-30°C~+60°C
	Working Humidity	20~90% TH non-condensing
	Storage Temp. Humidity	-40°C~+85°C, 10~95% TH
Safety & EMC	Safety Standards	Compliance to IEC/EN60950/60335
	Withstand Voltage	I/P-O/P:1.8KVAC, I/P-FG:1.8KVAC, O/P-FG:0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25 ° C/70% RH
	EMC Emission
	EMC Immunity
Others	Dimension	26015892(LWH)
Others	Packing	3.84Kg; pcs/ Kg/ CUFT
Note	Modification for charger specification may be required for different battery specification. Please contact battery vendor and ELECTRONY for detail. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C ambient temperature. Product Liability Disclaimer: For detail information please contact the servicer